Precision processing capability
A wide range of tolerance options to ISO 2768 (standard and fine grade) and ISO 286 (grades 8, 7, 6).
Precision Stamping
Single-cavity, progressive and compound dies from 25 to 400 tonnes, holding ±0.05mm repeatability across high-volume flat and shallow parts. Over 5,000 dies in house and an 18-minute changeover keep schedule pressure off your programme — supporting flexible switching between 50–5,000 piece multi-variety runs and over 100,000 piece volumes.
0.1–10mm thickness±0.05mm repeatability25–400T press range5,000+ dies in house
Procurement Problems
Do You Have These Troubles Buying Precision Stamping Parts?
Most of these are coordination failures rather than manufacturing problems. Here is how each one is handled here.
The design is not reasonable and needs rework?
Professional analysis, evaluation and verification of manufacturing feasibility before tooling.
Does it take a lot of effort to produce the drawings?
No need for professional engineering 3D drawings. A sketch with dimensions is enough to start.
Is the quality uneven between batches?
Strict quality management with 100% inspection from raw material through to finished goods.
Is the quotation period too long?
Specialised personnel, specialised service, specialised quotation. Reply within 2 working hours.
Can the delivery date be guaranteed?
Information-based production management with controllable, visible progress.
One-Stop Service
Precision Stamping — One-Stop Service
From prototype design development through prototyping and batch production, we provide materials, finishes and a complete process flow in one order.
01
Die Design & Build
Tooling design, cutting, assembly and hardening carried out in our own die shop.
02Coil Feeding & Blanking
High-speed disc blanking from coil with decoiling and levelling.
03Progressive Stamping
Pierce, form and cut in a single stroke for high-volume flat parts.
04Compound Forming
Two-level forming where the part geometry demands it.
05Part Deburring
Edge breaking so stacked parts do not scratch each other.
06Riveting & Fastening
Press and rivet fasteners; peening for permanent attachment.
07Plating & Coating
Zinc, nickel and tin plating, or powder coat, on stamped surfaces.
08Heat Number Marking
Part of the complete precision stamping process flow, handled in-house.
Equipment
Precision Stamping And Inspection Equipment
10,000m² facility with over 100 machines across cutting, forming, joining and inspection — all under one roof, all calibrated and traceable.
Mechanical press line, 25–400T
Progressive and compound die setups with automatic oiling and part ejection.
PRESS LINECoil handling and straightening
Coil-to-blank line with decoiling, straightening and levelling for consistent material.
COIL LINEProgressive die shop
Design, cutting, assembly, hardening and maintenance of 5,000+ stamping dies in-house.
DIE SHOPCNC die spotting
Die inspection and relief cutting to keep dimensions stable across die life.
DIE SPOTTINGAutomatic feeding systems
Payload feeders, transfer feeds and vibratory bowl feeding for stable line rate.
FEEDINGLaser marking station
Heat number and part marking for full batch traceability on stamped parts.
MARKINGFirst-article CMM inspection
Every new die verified on the CMM before batch production starts.
INSPECTION
Material Library
Over 100 Material Grades Available
We provide selection advice based on your application, then recommend the configuration that gets you the best cost and performance balance.
Aluminium
Excellent strength-to-weight ratio, high thermal and electrical conductivity, low density and natural corrosion resistance. Can be anodized.
- 1050
- 1060
- 3003
- 3004
- 5052
- 5083-H111
- 6061-T6
- 6061-T651
- 6063
- 6066
- 6082-T651
- 7075-T6
- 7075-T651
- 2024-T3
- 2024-T351
- 7075-T7351
- A380
- MIC6
Stainless Steel
Corrosion resistance and strength at temperature. Food-safe, medical and outdoor grades available.
- 201
- 202
- 301
- 304
- 304L
- 316
- 316L
- 430
- 440C
- 17-4PH
- 410
- 420
Carbon Steel
The lowest-cost structural option. Best for brackets, frames and enclosures where cosmetic finish is secondary.
- SPCC
- SGCC
- SECC
- Q235
- Q345
- S235JR
- S275JR
- SAE 1008
- SAE 1010
Copper & Brass
High electrical and thermal conductivity with natural corrosion resistance. Machines cleanly for connectors.
- C11000
- C122
- C260
- C360
- C464
- C706
- H59
- H62
- H65
- HPB
- T2
- T3
Titanium
Six times stronger than aluminium at half the weight of steel. Aerospace, medical and marine grades.
- Gr1
- Gr2
- Gr5
- Ti-6Al-4V
- Ti-6Al-4V ELI
- TA1
- TA2
Tool Steel
Hardened tooling and wear components. Also supplied as spare die parts machined from these grades.
- SKD11
- SKD61
- DC53
- H13
- S136
- Cr12MoV
- Cr12
- P20
- 718H
ABS
A common thermoplastic with excellent impact resistance, thermal stability and chemical resistance. Easy to machine, smooth surface finish.
- ABS790
- ABS750
- ABS-H80
- ABS-GF20
Polycarbonate / PC-ABS
High impact strength with a Class V flame rating. The default for consumer electronics housings.
- Lexan
- Makrolon
- Bayblend FR3010
- PC/ABS 2805
Nylon / PA
Low friction and wear resistant. Used for gears, bushings and sliders; glass-filled grades add stiffness.
- PA6
- PA66
- PA66+GF30
- PA12
- PA6+GF20
- MC nylon
POM / Acetal
Dimensional stability and low friction. Excellent for precision gears and snap-fit features.
- POM-C
- POM-H
- Delrin 100
- Delrin 500
- POM GF25
PEEK
Continuous 250°C service temperature with chemical and wear resistance. Medical and aerospace.
- PEEK
- PEEK-CF30
- PEEK-GF30
- PEEK-T
PTFE
Non-stick, chemically inert and very low friction. Seals, gaskets and insulator components.
- PTFE virgin
- PTFE-V
- PTFE filled (glass/carbon)
- Teflon
Product Showcase
Precision Stamping Product Families We Manufacture
Thousands of finished part case studies. Send a drawing and we will show you comparable parts we have already made.
Electrical Connector Parts
Motor End Shields
Terminal Blocks
Battery Snap Tabs
Switch Mounting Plates
Automotive Body Panels
Furniture Support Brackets
Hardware Washers and Plates
Advantages
Advantages of Precision Stamping
Full-chain autonomous control — which is what makes the quality-price ratio work.
Fast delivery capability
Over 100 sets of equipment and a fully self-contained team complete high-precision prototypes within hours.
Quality inspection guarantee
100% inspection from raw material through semi-finished to finished goods, under ISO 9001 management.
Seamless, highly efficient production
Sheet metal parts coordinated with CNC and EDM through information management, reducing cost and lead time.
Comprehensive tracking service
A dedicated business manager, engineer and support team giving 1+1+N project-based service.
All-in-one surface treatment
Anodizing, electroplating, powder coating and painting to enhance durability and appearance.
Surface Treatment
Surface Treatment Service
Choose us, and ensure every processed item is durable and visually appealing.
01
Roller deburringDrum deburr — not for fragile thin parts
02
Powder coatingPolyester, epoxy and fluorocarbon, RAL or Pantone
03
AnodizingType I, II and III, dye to Pantone with sealing
04
Hard anodizing (Type III)Surface hardness up to 60 HRC, wear resistant
05
Electrolytic polishingRa ≤ 0.4μm on machined surfaces
06
PassivationAMS 2700 and ASTM A967, chrome-free available
07
Chemical nickel platingUniform deposit, corrosion and wear resistant
08
Chromate conversionTrivalent and hex-free passivation systems
09
Gilding / gold platingFor conductivity and corrosion resistance
10
Electro / hot-dip galvanizingISO 1461 for outdoor steel parts
11
Silver platingHigh conductivity for electrical contacts
12
Black oxide (blackening)Anti-glare, oil-absorbing finish
Ordering Process
Five Steps From Drawing to Delivery
01
Send Your Drawing
Email it to pengfeng@pf898.com, or describe the part in the quote form.
02
Evaluation & Quote
Engineer reviews manufacturability. Reply within 2 hours.
03
Order & Production
Tooling starts on confirmation; batch tracked to your schedule.
04
Quality Inspection
In-process SPC plus final CMM measurement and written report.
05
Delivery & Acceptance
Export packing, documents and door-to-door delivery.
Client Feedback
Industries We Serve With Precision Stamping
FAQ
Common Questions About Precision Stamping
How is the cost of custom manufacturing calculated?
Cost is material plus tooling (if any) plus processing time plus finishing, quoted as one line-item breakdown. Tooling is a one-off; repeat orders in the same part drop to the unit price alone.
How long does it take from design to delivery?
Prototypes take 3–5 days. Standard production is 7–15 days depending on volume and finishing. Anodizing and powder coating add 2–4 days because they are batch processes.
What is your quality assurance promise?
Any batch failing our own acceptance criteria is replaced or reworked at our expense before it ships. Every shipment carries a dimensional report and material certificates.
Can you sign an NDA before seeing my drawings?
Yes. We sign mutual NDAs before file review and will hold tooling exclusively for your part with your name stamped on it.
What file formats do you accept?
STEP, STP, DWG, DXF, IGES, IGS, PDF, and images. A sketch with the key dimensions and tolerance is enough to start — engineering drawings are not required.
Our Quality Commitment
Any batch that fails our own acceptance criteria is replaced or reworked at our expense before it ships — not after you complain. Every order carries a dimensional report and EN10204 3.1 material certificates as standard.
Other Capabilities